Ikonka Art.KX7952 Transparent clear roll smooth1,52x15m

TRANSPARENT CLEAR SMOOTH FILM ROLL 1.52X15M

NOTE! By purchasing this product you will receive one roll of 1.52x15m.

Do you want to give the interior of your home a new and unique look?

Or do you want to protect your car paintwork from damage?

We have the answer to your needs.

Our thermoplastic self-adhesive transparent transparent transparent film is a decorative product. It will give your objects a fresh look - bring them to life! Our veneer film is the ideal material for inexpensively masking damage and other imperfections. It will even out the texture and surface of your object, making it appear smoother and more aesthetically pleasing. Additionally, it will protect the object from damage.

Self-adhesive transparent transparent transparent clear film is ideal for protecting furniture, cars and all other objects from the harmful effects of sunlight or dust. It will definitely reduce potential mechanical damage and prevent scratches and chipping.

• self-adhesive - the film has a specialised channel adhesive which makes it easy to stick and minimises the risk of air bubbles; the film is easy to install, especially on flat, even surfaces

• easy to touch up - you may be thinking, "what if I stick the film wrong?" Relax! You are even able to get the full strength of the film within a few minutes of first fixing. In the initial phase, the adhesive still "binds" weakly, making it easy for you to correct your mistake

• trouble-free removal - the film can be easily removed using warm air; no adhesive residue is left behind

• flexible and thermoplastic - the foil can be cut to the most diverse shapes. Simply apply heat, which increases its plasticity

• easy to cut - the film has evenly spaced lines on the inside for easy cutting to size

• resistant resistant to abrasion, detergents and even oil and grease

• easy to clean - simply wipe with a damp cloth.

2 Installation instructions

NOTE! If you want to use a heat gun remember to keep the correct distance. The same applies to the hair dryer. Too high a temperature can make the veneer sticky.

1) Preparation of the fo il - the foil has evenly spaced lines on its inner side. Based on these, cut out the appropriate piece with scissors. ATTENTION: It is advisable to allow 2-3 cm for wrapping the film underneath the element to be wrapped.

2) Surface preparation - the area where the foil will be applied should be well degreased and wiped. It must be clean and dry.

3) Mounting the film - apply the film by gradually peeling off the protective paper. For flat surfaces, press down using a squeegee. However, if you come across curved or uneven shapes, heat up the film using a heat gun, for example. The film will become malleable and with a little patience and precision will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - the channel adhesive minimises the risk of air bubbles. However, if they do appear, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

The foil is primarily recommended for interior use. It can also be used on the outside.

Attention! There are places and objects to which it is not advisable to adhere the foil:

• do not stick to moving parts - e.g. door hinges - as the foil may come off

• do not stick on hot surfaces - e.g. lamps, oven doors - as the film may burn.

4 Specification

Film type - SELF-ADHESIVE

Thickness:

Roll dimensions: 1.52x15m

Channel adhesive: yes

Thermoplastic: yes

Waterproof: yes

Temperature of use - from -40°Cto +80°C

ATTENTION! When purchasing this product you will receive one roll of 1.52x15m.

Parameters: