MILLY MALLY 6978 Nino Grey Co-Sleeping Crib

The Nino co-sleeping crib by Milly Mally has been designed for parents who want to keep their baby close throughout the night. The 2-in-1 model can serve as a co-sleeper attached to the parents' bed as well as a standalone crib for infants, providing comfort, safety, and convenience for daily care. Thanks to the drop-down side and height adjustment, the crib can be easily adapted to most beds. The proximity of the baby facilitates nighttime feeding, care, and soothing without the need to get up. Why choose the Nino crib? co-sleeping and standalone crib function 6-level height adjustment drop-down side with mesh soft mattress included straps to secure to parents' bed lightweight and easy to transport stable legs with wheels and brakes modern design by Milly Mally Comfort for the baby and convenience for parents The NINO crib provides a safe sleeping space for the infant, while allowing parents quick access to the baby at night. The mesh sides improve air circulation and allow for constant monitoring of the little one. The soft mattress increases sleeping comfort, and the ability to gently tilt the crib can be helpful during a cold or reflux. Safety and stable construction The model is equipped with special securing straps that firmly connect the crib to the parents' bed. All wheels have locks, which increases safety during use. The crib meets European safety standards EN 1130:2019, and the mattress complies with standard EN 16890. Product characteristics co-sleeping function standalone crib function 6-level height adjustment drop-down side with mesh straps to secure to the bed lightweight and stable detachable wheels with brakes soft mattress included possibility of gentle tilting easy to clean quick folding system age range: 0–6 months maximum load: 9 kg The perfect crib for the first months of life The Nino co-sleeping crib by Milly Mally is a practical solution for parents of newborns and infants. It combines safety, functionality, and user comfort, ensuring peaceful sleep for the baby and ease of care every day. TECHNICAL DATA: DIMENSIONS OF THE CRIB: internal length: 80 cm internal height: 35 cm internal width: 47.5 cm DIMENSIONS OF THE MATTRESS: length: 79 cm width: 46.5 cm thickness: 2.5 cm HEIGHT ADJUSTMENT: Height adjustment levels – measured from the floor level 1 (lowest): 81 cm level 2: 83 cm level 3: 85 cm level 4: 87 cm level 5: 89 cm level 6 (highest): 91 cm Height adjustment levels – measured from the floor to the crib mattress level 1 (lowest): 51 cm level 2: 53 cm level 3: 55 cm level 4: 57 cm level 5: 59 cm level 6 (highest): 61 cm DIMENSIONS OF THE PACKAGE: Length: 90 cm Width: 10 cm Height: 53 cm Net weight: 7.4 kg Gross weight: 8.6 kg PRODUCT SAFETY INFORMATION Crib-Co-Sleeping Crib Nino The crib is intended for children from birth to 6 months of age. The maximum allowable weight of the child is 9 kg. The crib complies with standard EN 1130:2019. The mattress complies with standard EN 16890:2017:A1:2021. WARNING The product is not suitable for children who can sit, kneel, or pull themselves up! WARNING Do not use this product without reading and understanding the instructions! WARNING Stop using the product as soon as the child begins to push up on their hands and knees, pull themselves up, or is able to sit independently! WARNING Placing anything (additional items/equipment) in the crib may cause suffocation! WARNING Do not place the product near elements/equipment that may pose a suffocation or hanging hazard such as cords, blinds, curtains, wires, etc. WARNING Do not use more than one mattress in the product! WARNING Be aware of the risks posed by open flames and other strong heat sources, such as electric or gas heaters, placed near the product! WARNING Use only the mattress sold with this crib, do not add a second mattress, as it poses a suffocation risk. The crib must be placed on a level surface. Small children should not play unsupervised near the crib. If leaving the child unattended, the crib should be locked in a stationary position and ensure that the side of the crib is not lowered. Always lock all wheels when not moving the product. The wheels must always be locked before placing the child in the crib! It is recommended that all mounting hardware is always properly tightened and that no screws are loose, as the child could catch on them with a body part or clothing (e.g., string, necklace, pacifier ribbon, etc.) which could pose a suffocation hazard. If using a different mattress – ensure that the mattress is connected to a firm mattress base (compare with the mattress included with the product), and that the entire mattress is made according to standard EN 16890:2017:A1:2021. Additionally, ensure that the total gap between the mattress and the sides and ends of the crib does not exceed 2.5 cm, and that the height of the mattress does not exceed the red warning line marked inside the product. The mattress must be selected so that the internal height of the crib (measured from the upper surface of the mattress to the upper edge of the crib side) is at least 200 mm in the highest position of the crib base – after insertion – it must be below the red warning line marked inside the product. The manufacturer recommends using the included mattress, which should not exceed 4 cm in thickness, and the mattress size should be perfectly matched to the crib dimensions. The maximum thickness of the mattress is 4 cm. Be aware of the risks posed by burning cigarettes, open flames, and other strong heat sources, such as electric or gas heaters, placed near the product. To avoid fire risk, do not place the crib/bassinet near open flames and other strong heat sources. Smoking is prohibited near the product. The maximum allowable tilt of the product is 2 levels – e.g., if the position on one leg is 4 – then the allowable position on the other leg can be at least 2 and at most 6. The child's head must always be on the side of the mattress with the higher leg position. DO NOT USE the crib and mattress if any part is missing, any part is damaged, cracked, broken, or torn. Contact the manufacturer: PM INVESTMENT GROUP Napert, Soszyński Sp.k. for spare parts or additional information. DO NOT USE other parts than those supplied by the manufacturer. CO-SLEEPING FUNCTION: WARNING – To avoid the risk of the child's neck being trapped on the drop-down side in co-sleeping mode (when the crib is attached to the parent's bed) – the upper part of the drop-down side must not be higher than the parent's mattress. WARNING – To avoid the risk of your child suffocating – the connecting system (parent's bed to co-sleeping crib) must always be kept away from the crib and away from the child. DANGER! When the crib is not attached to the parent's bed – never leave the drop-down side of the co-sleeping crib down! To use the co-sleeping function, 2 securing straps are required to attach the crib to the parent's bed (element G) and the strap mounting clips (mounted on the frame). DO NOT USE the co-sleeping function if any part is missing, any part is damaged, cracked, broken, or torn. Contact the manufacturer: PM INVESTMENT GROUP Napert, Soszyński Sp.k. for spare parts or additional information. DO NOT USE other parts than those supplied by the manufacturer. The co-sleeping function can be used if the height of the parent's bed (measured from the floor) is at least 65 cm and at most 75 cm. The co-sleeping function can only be used for beds where it is possible to remove the mattress (this is necessary to properly install the connecting straps between the product and the parent's bed). The mattress cannot be wider than 180 cm, and the side of the mattress should be level with the side of the bed. The parent's bed should have space underneath to allow partial insertion of the legs under the bed. Do not use for beds with irregular construction and water beds. Use only the connecting system suggested by the manufacturer. Do not use other connecting systems. Never use the co-sleeping function to set the crib with a tilted surface. When adjusting the height – set the same level on both sides. To avoid the risk of suffocation (in case the child gets trapped between the co-sleeping crib and the parent's bed), the co-sleeping crib must be properly attached to the parent's bed using the included connecting system. There must never be a gap between the drop-down side of the co-sleeping crib and the parent's bed mattress. Before use – check the tightness of the connection between the co-sleeping crib and the parent's bed by pulling the co-sleeping crib away from the parent's bed. If there is any gap between the co-sleeping crib and the parent's bed, DO NOT USE this function of the product. Any gaps must not be filled with pillows, blankets, or other items. When the child can sit, kneel, or pull themselves up, do not continue to use the crib for such a child. Do not use the crib body without the frame. Do not leave the child unattended. Never move the product with the child inside. Do not change the height of the crib while the child is inside. Risk of entanglement and suffocation: • Do not place strings, cords, straps, or similar items that may wrap around the child's neck near this product. Suffocation hazard when the child: • Gets into the gap between the edge of the mattress and the side of the crib • Lies face down on a soft surface To avoid crib death, place your child to sleep on their back or according to your pediatrician's advice. To avoid the risk of suffocation, remove the plastic cover from the product before use. This packaging should then be destroyed or kept out of reach of children and infants. Product intended for home use. All other information can be found in the user manual, the link to which is available on the manufacturer's website. Manufacturer: PM INVESTMENT GROUP Napert, Soszyński Sp.k. Podkowy 18 04-937 Warsaw, Poland email: [email protected] Link to the manual: www.pminvestment.pl/manual/nino_manual.pdf